Series 77 Pneumatic Actuated 3 Piece Ball Valve
Series 77 Pneumatic Actuated 3 Piece Ball Valve
Series 77 Pneumatic Actuated 3 Piece Ball Valve is a fully maintainable three piece, full bore isolating valve; providing a cost-effective solution for the 'shut-off' of medium flows on semi aggressive fluids. A pneumatically actuated reliable valve with Stainless Steel body and PTFE seat.
Actuation is either Single or Double acting with a range of configurable options including limit switches, solenoid valves and positioners.
In addition, our pneumatic quarter turn rack and pinion actuator is sized with a 30% safety factor built-in, requiring a pilot pressure of 5.5 Bar and benefits from a Namur interface for both pilot solenoid valve and switchbox.
Key features:
- Available in Screwed BSP, Butt Weld, Socket Weld or NPT, sizes: 1/4" to 4" (subject to configuration).
- Pressure range: 1000 PSI
- Temperature range: -20°C to 200°C.
- Features a blow-out proof stem.
Pneumatic Actuated Ball Valves are designed to meet the demanding needs of today's process flow control requirements. During build up all actuated packages are rigorously inspected and 100% factory tested prior to dispatch.
| Manufacturer | VOLT |
|---|---|
| End Connection | BSP, NPT, Socket Weld, Butt Weld OD |
| Body Material | Stainless Steel |
| Size | 1/4" (DN8), 3/8" (DN10), 1/2" (DN15), 3/4" (DN20), 1" (DN25), 1 1/4" (DN32), 1 1/2" (DN40), 2" (DN50), 2 1/2" (DN65), 3" (DN80), 4" (DN100) |
| Design | 3 Piece, Full Bore |
| Industry / Approvals | General / Industrial / Process |
The following downloads are available for the Series 77 Pneumatic Actuated 3 Piece Ball Valve:
